Why is my Fisher & Paykel DishDrawer leaking?

A hardened lid seal or a drawer that is not closing fully are the most common causes. Overloading or dishes blocking the lid can also cause leaks. Replacing the lid seal usually solves it.

After a thunderstorm my Harrisburg dishwasher's lights flash and it won't start. What should I do?

Turn off its breaker for a full minute, then restore power and try a short cycle. Many controls recover from a surge that way. If the error returns, a board or sensor may have been damaged, and we can test it during a visit.

Do you repair dishwashers in Concord townhomes where the unit is tight under the counter?

Yes. We slide the dishwasher out carefully to reach the water line, drain and wiring, then reset and level it when the repair is done. If the mounting brackets or the water connection are part of the problem, we point that out too.

Fisher & Paykel Repair

Fisher & Paykel Dishwasher Repair in Concord & Harrisburg, NC

Fisher & Paykel dishwasher repair in Concord & Harrisburg, Cabarrus County. We diagnose first and agree the price before any work.

Same-day appointments when available90-day parts / 30-day labor warrantyAll major brandsPrice confirmed before work

(980) 588-8688

Open 24 hours, 7 days a week

Schedule Your Repair

Service Type

What type of service do you need?

Or call us directly:

(980) 588-8688

90-Day

Parts Warranty

Same Day

Availability

How It Works

Book Online or Call

Tell us the appliance, the brand and what it is doing

Technician Visit

Same-day when the schedule allows

Diagnose & Quote

Price agreed first — no work without your approval

Fix & Test

Repair done, tested before we leave

Related Services

Samsung Dishwasher Repair

LG Dishwasher Repair

Whirlpool Dishwasher Repair

GE Dishwasher Repair

Maytag Dishwasher Repair

Bosch Dishwasher Repair

KitchenAid Dishwasher Repair

Frigidaire Dishwasher Repair

Charlotte, NC & Nearby SC

Ready to schedule your repair?

ProFix Appliance Repair Charlotte — appliance repair across the Charlotte region. Same-day appointments when the schedule allows.

Call (980) 588-8688 Book Online Now

Fisher & Paykel Dishwashers: What We Check First

The DishDrawer is the reason many people know Fisher & Paykel. Each drawer is a complete dishwasher: a pull-out tub, an integrated motor and pump at the bottom, a filter, and a lid that lowers to seal the tub during the wash. A flexible harness and hose follow the drawer as it opens and closes, carrying power, signals and water. In a double DishDrawer, the top and bottom are independent machines that share a cabinet but not a motor or control. Fisher & Paykel also sells conventional built-in dishwashers, which follow a more familiar design.

Hardened lid seal letting water or steam escape the drawer
Lid mechanism failure preventing the tub from sealing
Integrated motor and pump fault stopping the wash
Worn flexible harness causing intermittent drawer faults

The full explanation, including what you can safely check yourself and when repair beats replacement, is in our Fisher & Paykel dishwasher repair guide.

Drains, disposers and storm-tripped controls

Most dishwashers here drain through the garbage disposer or a high loop under the sink. A disposer installed without its knockout plug removed, a clogged air gap, or a drain hose kinked behind the cabinet will leave water in the tub. Inside the machine, the filter at the bottom collects food and glass bits, and a neglected one causes poor cleaning long before anything breaks.

Concord and Harrisburg homes on city water rarely deal with the sediment that wells bring, but summer thunderstorms are another matter. A flicker of power can leave a newer dishwasher frozen mid-cycle or flashing an error. Turn the dishwasher's breaker off for a minute, turn it back on, and run a short cycle. Clean the filter while you wait.

If that does not clear it, the technician tests the drain pump, inlet valve, heater, door latch and control board. Builder-grade dishwashers in newer subdivisions are generally worth repairing when the problem is a pump or valve, and we will tell you when a cracked tub or a failed board on an older model points toward replacement instead.