My Roper gas oven lights with a whoosh after a long wait. Is that dangerous?

Delayed ignition with a puff usually means the igniter is weakening and the valve is opening late. It is a known wear pattern and should be repaired soon, because delayed ignition can startle and is hard on the oven. Replacing the igniter is the typical fix.

Can you bring the right oven igniter on the first trip to Oakboro?

We try to. If you give us the model number when you book, we can check which parts are likely and bring them when possible. If something must be ordered, we explain the timing before we go.

My oven in Locust shows an error after a storm. Will a reset fix it?

Sometimes. Turn off the breaker for a minute and restore power. If the error comes back, a sensor or control may be damaged, and we can test both.

Roper Repair

Roper Oven / Range Repair in Locust, Stanfield & Oakboro, NC

Roper oven / range repair in Locust, Stanfield & Oakboro, Stanly County. We diagnose first and agree the price before any work.

Same-day appointments when available90-day parts / 30-day labor warrantyAll major brandsPrice confirmed before work

(980) 588-8688

Open 24 hours, 7 days a week

Schedule Your Repair

Service Type

What type of service do you need?

Or call us directly:

(980) 588-8688

90-Day

Parts Warranty

Same Day

Availability

How It Works

Book Online or Call

Tell us the appliance, the brand and what it is doing

Technician Visit

Same-day when the schedule allows

Diagnose & Quote

Price agreed first — no work without your approval

Fix & Test

Repair done, tested before we leave

Related Services

Samsung Oven / Range Repair

LG Oven / Range Repair

Whirlpool Oven / Range Repair

GE Oven / Range Repair

Maytag Oven / Range Repair

Bosch Oven / Range Repair

KitchenAid Oven / Range Repair

Frigidaire Oven / Range Repair

Charlotte, NC & Nearby SC

Ready to schedule your repair?

ProFix Appliance Repair Charlotte — appliance repair across the Charlotte region. Same-day appointments when the schedule allows.

Call (980) 588-8688 Book Online Now

Roper Oven / Ranges: What We Check First

Roper ovens are the lower section of Whirlpool-built freestanding ranges. Gas ovens use a hot-surface glow-bar igniter wired in series with the safety valve, so the valve opens only when the igniter draws enough current. Electric ovens use separate bake and broil elements controlled by a temperature sensor and either a mechanical thermostat on older models or an electronic control on newer ones. Each layout fails in a few typical ways.

Weak bake igniter failing to draw enough current for the valve
Burned-out electric bake element with visible breaks or blisters
Temperature sensor drifting out of range causing uneven baking
Mechanical oven thermostat out of calibration on older models

The full explanation, including what you can safely check yourself and when repair beats replacement, is in our Roper oven / range repair guide.

Planning an oven repair at the edge of the map

Ovens in newer Locust homes typically have electronic controls, hidden bake elements and temperature sensors, while older kitchens near Oakboro may still use an exposed element or a propane oven with a glow-bar igniter. The most common failures are a weak igniter, a burned-out element or a sensor that drifts. Surges after storms can also damage control boards.

Check the breaker, confirm no delay or lockout is set, and on propane models make sure the tank has fuel. If you smell gas, turn off the oven, leave and call your supplier or 911. Note the model number from the label behind the oven door or drawer.

Because visits here may be scheduled on route days, that model number lets us check parts ahead of time. The technician tests the oven, explains what failed and gives you the price before repairing. If a part has to be ordered, we tell you before leaving and set the return visit.