Can I replace a Roper coil element myself?

Swapping a plug-in coil is simple with the breaker off and the burner cold, as long as the receptacle is undamaged. If the receptacle is scorched or melted, a new coil alone will not fix it and may be damaged quickly. That repair is better left to a technician.

One burner on my Locust gas cooktop will not light. Is it the igniter?

Possibly, or the burner cap may be out of position or the ports clogged. Dry and reseat the cap first. If it still will not light, we test the igniter and spark module.

Can you replace a cracked glass cooktop in Oakboro?

Often, if the glass top is still available for your model. Give us the model number so we can check before the trip. Stop using the cooktop until it is repaired.

Roper Repair

Roper Cooktop Repair in Locust, Stanfield & Oakboro, NC

Roper cooktop repair in Locust, Stanfield & Oakboro, Stanly County. We diagnose first and agree the price before any work.

Same-day appointments when available90-day parts / 30-day labor warrantyAll major brandsPrice confirmed before work

(980) 588-8688

Open 24 hours, 7 days a week

Schedule Your Repair

Service Type

What type of service do you need?

Or call us directly:

(980) 588-8688

90-Day

Parts Warranty

Same Day

Availability

How It Works

Book Online or Call

Tell us the appliance, the brand and what it is doing

Technician Visit

Same-day when the schedule allows

Diagnose & Quote

Price agreed first — no work without your approval

Fix & Test

Repair done, tested before we leave

Related Services

Samsung Cooktop Repair

LG Cooktop Repair

Whirlpool Cooktop Repair

GE Cooktop Repair

Maytag Cooktop Repair

Bosch Cooktop Repair

KitchenAid Cooktop Repair

Frigidaire Cooktop Repair

Charlotte, NC & Nearby SC

Ready to schedule your repair?

ProFix Appliance Repair Charlotte — appliance repair across the Charlotte region. Same-day appointments when the schedule allows.

Call (980) 588-8688 Book Online Now

Roper Cooktops: What We Check First

Standalone Roper cooktops are not common, so most surface-burner work on Roper equipment involves the top of a Roper range. Electric Ropers almost always use plug-in coil elements set in drip pans, each controlled by an infinite switch that cycles power on and off. Older built-in cooktops with the Roper badge follow the same design. Because each burner is its own circuit, a failure is usually limited to one position.

Overheated receptacle losing contact tension behind the drip pan
Pitted coil element terminals causing intermittent heating
Infinite switch failure leaving a burner glowing at all settings
Heat-damaged wiring between switch and receptacle on older units

The full explanation, including what you can safely check yourself and when repair beats replacement, is in our Roper cooktop repair guide.

Burners, elements and planning the trip

On a propane or natural gas cooktop, the usual troubles are burners that will not light, light weakly or keep clicking, caused by wet or dirty igniters, misaligned caps or a failing spark module. Glass-top electric cooktops lose individual elements or switches, and induction boards can be damaged by storm surges. A cracked glass top should not be used until it is replaced, since spills can reach the wiring underneath.

Dry and reseat burner caps, check the breaker and confirm the propane tank has fuel. If you smell gas, shut it off, leave and call your supplier or 911. Sharing the model number when you book helps, since visits here may fall on route days and we want to arrive with the likely part. We give you the price before any repair, and we tell you if a discontinued part makes replacement the better path.