My Roper burner clicks but never lights. What should I check?

With the stove off and cool, make sure the burner cap is seated correctly and the ports are clear. Look at the igniter tip for cracks or crusted food. If everything looks clean and it still will not light, the igniter or wiring may need replacing.

Are parts still available for the older electric stove in my Oakboro farmhouse?

Coil elements, receptacles and switches usually are. Some model-specific parts are discontinued, and we will tell you if so before you commit. Give us the model number when you book.

My propane stove in Stanfield lights slowly on every burner. What is wrong?

Weak ignition on every burner often points to the spark module or low propane pressure. Check the tank level first. We test the ignition system and leave regulator work to your propane supplier.

Roper Repair

Roper Stove Repair in Locust, Stanfield & Oakboro, NC

Roper stove repair in Locust, Stanfield & Oakboro, Stanly County. We diagnose first and agree the price before any work.

Same-day appointments when available90-day parts / 30-day labor warrantyAll major brandsPrice confirmed before work

(980) 588-8688

Open 24 hours, 7 days a week

Schedule Your Repair

Service Type

What type of service do you need?

Or call us directly:

(980) 588-8688

90-Day

Parts Warranty

Same Day

Availability

How It Works

Book Online or Call

Tell us the appliance, the brand and what it is doing

Technician Visit

Same-day when the schedule allows

Diagnose & Quote

Price agreed first — no work without your approval

Fix & Test

Repair done, tested before we leave

Related Services

Samsung Stove Repair

LG Stove Repair

Whirlpool Stove Repair

GE Stove Repair

Maytag Stove Repair

Bosch Stove Repair

KitchenAid Stove Repair

Frigidaire Stove Repair

Charlotte, NC & Nearby SC

Ready to schedule your repair?

ProFix Appliance Repair Charlotte — appliance repair across the Charlotte region. Same-day appointments when the schedule allows.

Call (980) 588-8688 Book Online Now

Roper Stoves: What We Check First

A Roper gas stove pairs four sealed or open burners on top with a gas oven below, all built on basic Whirlpool hardware. Ignition is electric on most models still in use: turning any burner knob closes a spark switch, which signals a spark module to fire every igniter at once. Some very old Ropers may still use standing pilots, which behave differently and need their own approach. Simple as the system is, small things like spills or a misplaced cap can stop it from working.

Clogged burner ports or crusted igniter stopping ignition
Wet spark switch behind the knob causing constant clicking
Yellow or lifting flames from dirty or misaligned burner parts
Failed spark module leaving every burner silent

The full explanation, including what you can safely check yourself and when repair beats replacement, is in our Roper stove repair guide.

Coil burners, propane and glass tops

Older electric stoves around Oakboro and Stanfield are usually straightforward repairs: a coil element, a scorched receptacle or a worn infinite switch. Propane stoves in rural homes tend to have igniter or clogged-port problems, especially after spills. Newer glass-top stoves in Locust can lose an element or a limiter, and a cracked top should be replaced before it is used again.

Turn off the stove and let it cool, then try a dead coil element in a working position to see whether the problem follows it. Confirm the propane tank has fuel, and dry any wet igniters. If you smell gas, shut everything off, leave and call your propane supplier or 911.

We test the parts, explain what failed and give you the price before repairing. Visits here may be grouped on route days, so a model number at booking helps us arrive ready, and simple stove parts are often fixable in one trip.