Why does my JennAir stove keep clicking after I turn the burner off?

Usually moisture or residue is shorting the ignition circuit at a burner switch or electrode. Turn the stove off, let it dry for a day, and clean around the burner. If it keeps clicking, the switch may need replacement, which is a straightforward repair.

Are parts still available for the older electric stove in my Oakboro farmhouse?

Coil elements, receptacles and switches usually are. Some model-specific parts are discontinued, and we will tell you if so before you commit. Give us the model number when you book.

My propane stove in Stanfield lights slowly on every burner. What is wrong?

Weak ignition on every burner often points to the spark module or low propane pressure. Check the tank level first. We test the ignition system and leave regulator work to your propane supplier.

JennAir Repair

JennAir Stove Repair in Locust, Stanfield & Oakboro, NC

JennAir stove repair in Locust, Stanfield & Oakboro, Stanly County. We diagnose first and agree the price before any work.

Same-day appointments when available90-day parts / 30-day labor warrantyAll major brandsPrice confirmed before work

(980) 588-8688

Open 24 hours, 7 days a week

Schedule Your Repair

Service Type

What type of service do you need?

Or call us directly:

(980) 588-8688

90-Day

Parts Warranty

Same Day

Availability

How It Works

Book Online or Call

Tell us the appliance, the brand and what it is doing

Technician Visit

Same-day when the schedule allows

Diagnose & Quote

Price agreed first — no work without your approval

Fix & Test

Repair done, tested before we leave

Related Services

Samsung Stove Repair

LG Stove Repair

Whirlpool Stove Repair

GE Stove Repair

Maytag Stove Repair

Bosch Stove Repair

KitchenAid Stove Repair

Frigidaire Stove Repair

Charlotte, NC & Nearby SC

Ready to schedule your repair?

ProFix Appliance Repair Charlotte — appliance repair across the Charlotte region. Same-day appointments when the schedule allows.

Call (980) 588-8688 Book Online Now

JennAir Stoves: What We Check First

On a JennAir stove, the cooking surface is where most daily wear happens. Gas models use sealed burners with brass or aluminum caps and an electronic spark ignition system, often with dual-stacked burners that can simmer very low. Electric and induction stoves use radiant elements or coils under a glass top. Some older JennAir stoves also have a built-in downdraft vent between the burners, which brings its own blower and filter into the picture.

Spark electrode fouled by spills, causing constant clicking on gas burners
Spark module or burner switch failure preventing ignition
Clogged or misaligned burner caps producing weak, uneven flames
Radiant element or switch failure leaving one electric burner cold

The full explanation, including what you can safely check yourself and when repair beats replacement, is in our JennAir stove repair guide.

Coil burners, propane and glass tops

Older electric stoves around Oakboro and Stanfield are usually straightforward repairs: a coil element, a scorched receptacle or a worn infinite switch. Propane stoves in rural homes tend to have igniter or clogged-port problems, especially after spills. Newer glass-top stoves in Locust can lose an element or a limiter, and a cracked top should be replaced before it is used again.

Turn off the stove and let it cool, then try a dead coil element in a working position to see whether the problem follows it. Confirm the propane tank has fuel, and dry any wet igniters. If you smell gas, shut everything off, leave and call your propane supplier or 911.

We test the parts, explain what failed and give you the price before repairing. Visits here may be grouped on route days, so a model number at booking helps us arrive ready, and simple stove parts are often fixable in one trip.