Why does my Kenmore gas stove keep clicking?

On Frigidaire-built Kenmore stoves, clicking that will not stop usually follows a spill that left water on the igniter or soaked a burner switch. Give the burner a few hours to dry and make sure the cap sits flat. Clicking that persists after that points to a shorted switch or a failing spark module.

Are parts still available for the older electric stove in my Oakboro farmhouse?

Coil elements, receptacles and switches usually are. Some model-specific parts are discontinued, and we will tell you if so before you commit. Give us the model number when you book.

My propane stove in Stanfield lights slowly on every burner. What is wrong?

Weak ignition on every burner often points to the spark module or low propane pressure. Check the tank level first. We test the ignition system and leave regulator work to your propane supplier.

Kenmore Repair

Kenmore Stove Repair in Locust, Stanfield & Oakboro, NC

Kenmore stove repair in Locust, Stanfield & Oakboro, Stanly County. We diagnose first and agree the price before any work.

Same-day appointments when available90-day parts / 30-day labor warrantyAll major brandsPrice confirmed before work

(980) 588-8688

Open 24 hours, 7 days a week

Schedule Your Repair

Service Type

What type of service do you need?

Or call us directly:

(980) 588-8688

90-Day

Parts Warranty

Same Day

Availability

How It Works

Book Online or Call

Tell us the appliance, the brand and what it is doing

Technician Visit

Same-day when the schedule allows

Diagnose & Quote

Price agreed first — no work without your approval

Fix & Test

Repair done, tested before we leave

Related Services

Samsung Stove Repair

LG Stove Repair

Whirlpool Stove Repair

GE Stove Repair

Maytag Stove Repair

Bosch Stove Repair

KitchenAid Stove Repair

Frigidaire Stove Repair

Charlotte, NC & Nearby SC

Ready to schedule your repair?

ProFix Appliance Repair Charlotte — appliance repair across the Charlotte region. Same-day appointments when the schedule allows.

Call (980) 588-8688 Book Online Now

Kenmore Stoves: What We Check First

This page focuses on the cooking surface of a Kenmore stove, whether it has gas burners, exposed electric coils or a smooth glass top. Most Kenmore stoves were built by Frigidaire, so the burner, switch and igniter designs match Frigidaire's. Some older and Elite models came from other makers. Knowing which one helps us bring the right parts. Older Kenmore coil stoves often have removable chrome or porcelain drip bowls under each burner, while newer smoothtops hide the elements under ceramic glass.

Scorched coil receptacle causing intermittent or dead burners
Infinite switch failing and leaving a burner stuck on high
Gas spark igniter fouled and clicking constantly
Glass top cracked or radiant element burned out

The full explanation, including what you can safely check yourself and when repair beats replacement, is in our Kenmore stove repair guide.

Coil burners, propane and glass tops

Older electric stoves around Oakboro and Stanfield are usually straightforward repairs: a coil element, a scorched receptacle or a worn infinite switch. Propane stoves in rural homes tend to have igniter or clogged-port problems, especially after spills. Newer glass-top stoves in Locust can lose an element or a limiter, and a cracked top should be replaced before it is used again.

Turn off the stove and let it cool, then try a dead coil element in a working position to see whether the problem follows it. Confirm the propane tank has fuel, and dry any wet igniters. If you smell gas, shut everything off, leave and call your propane supplier or 911.

We test the parts, explain what failed and give you the price before repairing. Visits here may be grouped on route days, so a model number at booking helps us arrive ready, and simple stove parts are often fixable in one trip.