My Kenmore washer fills but won't spin. What is wrong?

On Whirlpool-built top-loaders, a failed lid switch or worn drive coupler is a common cause. On front-loaders, a door lock or drain pump issue may stop the spin. Knowing the model prefix helps narrow it down.

Our Rock Hill rental washer keeps getting overloaded. Is it worth repairing again?

That depends on what failed and how often. Suspension and lid-switch repairs on a common top-loader are usually economical, while a worn transmission or tub bearing on an older machine may not be. We will give the owner the price and an honest opinion before any work.

The shutoff valve behind my washer in an older Rock Hill house is leaking. Do you fix that?

We will point it out and can replace the fill hoses on the washer, but a corroded wall valve is plumbing work. If it is weeping, close the main water supply when needed and have a plumber replace it. Then we can finish the washer repair on solid connections.

Kenmore Repair

Kenmore Washer Repair in Rock Hill, SC

Kenmore washer repair in Rock Hill, York County. We diagnose first and agree the price before any work.

Same-day appointments when available90-day parts / 30-day labor warrantyAll major brandsPrice confirmed before work

(980) 588-8688

Open 24 hours, 7 days a week

Schedule Your Repair

Service Type

What type of service do you need?

Or call us directly:

(980) 588-8688

90-Day

Parts Warranty

Same Day

Availability

How It Works

Book Online or Call

Tell us the appliance, the brand and what it is doing

Technician Visit

Same-day when the schedule allows

Diagnose & Quote

Price agreed first — no work without your approval

Fix & Test

Repair done, tested before we leave

Related Services

Samsung Washer Repair

LG Washer Repair

Whirlpool Washer Repair

GE Washer Repair

Maytag Washer Repair

Bosch Washer Repair

Frigidaire Washer Repair

Kenmore Washer Repair

Charlotte, NC & Nearby SC

Ready to schedule your repair?

ProFix Appliance Repair Charlotte — appliance repair across the Charlotte region. Same-day appointments when the schedule allows.

Call (980) 588-8688 Book Online Now

Kenmore Washers: What We Check First

Kenmore washers came from Whirlpool, LG and Frigidaire. The model prefix 110 usually means a Whirlpool-built top-load or front-load washer, 796 points to LG, and 417 to Frigidaire front-loaders. Top-load Kenmore washers from Whirlpool are especially common in older homes, and many are still running. Front-load Kenmore Elite washers were often LG-built. Laundry pairs from Sears were often sold as matched sets, so the dryer beside the washer may share the same maker and the same model prefix.

Lid switch failure on Whirlpool-built top-loaders stopping spin
Drive coupler worn on older direct-drive Kenmore top-loaders
Drain pump clogged on LG-built front-load Kenmore Elite washers
Front-load door boot mildew and bearing noise as machines age

The full explanation, including what you can safely check yourself and when repair beats replacement, is in our Kenmore washer repair guide.

Overloaded machines and aging connections

Washers in student and workforce rentals take a beating. Overstuffed loads wear suspension rods, tub bearings and lid switches, and coins or hair ties in pockets end up in the drain pump. A top-loader that bangs during spin or a machine that stops with water in it often tells that story, and those are usually reasonable repairs on a common model.

Older houses near downtown add another variable: the plumbing behind the machine. Original shutoff valves can seize or weep, and rubber fill hoses may be many years old. Before any repair, we look at what the washer connects to, because a new pump will not help if the valve behind it is leaking onto the floor.

Front-loaders in the newer subdivisions

Away from the center, many homes have front-load washers in second-floor laundry rooms. In this humidity, the door boot and dispenser drawer grow mildew quickly unless they are dried after use. If yours smells or shows black spots, wipe the boot, run a cleaning cycle and leave the door open. Leaks, error codes and drain faults are the point to call, and we quote the fix before starting.