Why does my JennAir stove keep clicking after I turn the burner off?

Usually moisture or residue is shorting the ignition circuit at a burner switch or electrode. Turn the stove off, let it dry for a day, and clean around the burner. If it keeps clicking, the switch may need replacement, which is a straightforward repair.

The receptacle under one burner on my Lancaster stove looks burned. Can I keep using it?

No. Stop using that burner, because a damaged receptacle can overheat and harm the wiring. We can replace the receptacle and element and check the switch, and we quote the work first.

Our stove came from a house on natural gas, and our Lancaster farmhouse runs on propane. What do we need?

The stove needs a propane conversion, which changes the orifices and the regulator setting. Running it unconverted produces oversized, sooty flames. Stop using it and have the conversion done before cooking on it.

JennAir Repair

JennAir Stove Repair in Lancaster, SC

JennAir stove repair in Lancaster, Lancaster County. We diagnose first and agree the price before any work.

Same-day appointments when available90-day parts / 30-day labor warrantyAll major brandsPrice confirmed before work

(980) 588-8688

Open 24 hours, 7 days a week

Schedule Your Repair

Service Type

What type of service do you need?

Or call us directly:

(980) 588-8688

90-Day

Parts Warranty

Same Day

Availability

How It Works

Book Online or Call

Tell us the appliance, the brand and what it is doing

Technician Visit

Same-day when the schedule allows

Diagnose & Quote

Price agreed first — no work without your approval

Fix & Test

Repair done, tested before we leave

Related Services

Samsung Stove Repair

LG Stove Repair

Whirlpool Stove Repair

GE Stove Repair

Maytag Stove Repair

Bosch Stove Repair

KitchenAid Stove Repair

Frigidaire Stove Repair

Charlotte, NC & Nearby SC

Ready to schedule your repair?

ProFix Appliance Repair Charlotte — appliance repair across the Charlotte region. Same-day appointments when the schedule allows.

Call (980) 588-8688 Book Online Now

JennAir Stoves: What We Check First

On a JennAir stove, the cooking surface is where most daily wear happens. Gas models use sealed burners with brass or aluminum caps and an electronic spark ignition system, often with dual-stacked burners that can simmer very low. Electric and induction stoves use radiant elements or coils under a glass top. Some older JennAir stoves also have a built-in downdraft vent between the burners, which brings its own blower and filter into the picture.

Spark electrode fouled by spills, causing constant clicking on gas burners
Spark module or burner switch failure preventing ignition
Clogged or misaligned burner caps producing weak, uneven flames
Radiant element or switch failure leaving one electric burner cold

The full explanation, including what you can safely check yourself and when repair beats replacement, is in our JennAir stove repair guide.

Keeping a long-serving stove cooking

Electric coil stoves in Lancaster's older homes tend to fail in predictable ways. A coil that stays cold may be burned out, the receptacle under it may be scorched or loose, or the infinite switch behind the knob may be worn. Turn the stove off, let it cool and reseat the coil firmly. If the receptacle looks melted or blackened, leave that burner off until it is replaced.

Gas and propane stoves fail differently. A burner that will not light usually has food or water in its ports or cap after a boil-over; remove the grate and cap, clear the ports with a pin and let everything dry. A stove moved from a natural gas home to a propane property must be converted, or it will burn with tall, yellow flames.

Safety and scheduling

If gas odor lingers with every burner off, get everyone outside and call the propane supplier, gas utility or 911 from there. Lancaster appointments may be grouped into route days. The technician tests igniters, valves, switches and receptacles, gives you the price first, and repairs carry a 90-day parts and 30-day labor warranty.