Can I replace a Roper coil element myself?

Swapping a plug-in coil is simple with the breaker off and the burner cold, as long as the receptacle is undamaged. If the receptacle is scorched or melted, a new coil alone will not fix it and may be damaged quickly. That repair is better left to a technician.

One burner on my Harrisburg island cooktop keeps clicking after it lights. What causes that?

Usually moisture or residue on the igniter, or a burner cap that is not seated flat. Let it dry fully and reseat the cap. If the clicking continues, the switch or spark module may be at fault, which we can test and replace.

Can you replace the cracked glass on a cooktop in my Concord kitchen?

Often, if the manufacturer still supplies the glass top for your model. We check part availability with your model number and quote the repair first. If the glass is not available, we will talk through replacement options.

Roper Repair

Roper Cooktop Repair in Concord & Harrisburg, NC

Roper cooktop repair in Concord & Harrisburg, Cabarrus County. We diagnose first and agree the price before any work.

Same-day appointments when available90-day parts / 30-day labor warrantyAll major brandsPrice confirmed before work

(980) 588-8688

Open 24 hours, 7 days a week

Schedule Your Repair

Service Type

What type of service do you need?

Or call us directly:

(980) 588-8688

90-Day

Parts Warranty

Same Day

Availability

How It Works

Book Online or Call

Tell us the appliance, the brand and what it is doing

Technician Visit

Same-day when the schedule allows

Diagnose & Quote

Price agreed first — no work without your approval

Fix & Test

Repair done, tested before we leave

Related Services

Samsung Cooktop Repair

LG Cooktop Repair

Whirlpool Cooktop Repair

GE Cooktop Repair

Maytag Cooktop Repair

Bosch Cooktop Repair

KitchenAid Cooktop Repair

Frigidaire Cooktop Repair

Charlotte, NC & Nearby SC

Ready to schedule your repair?

ProFix Appliance Repair Charlotte — appliance repair across the Charlotte region. Same-day appointments when the schedule allows.

Call (980) 588-8688 Book Online Now

Roper Cooktops: What We Check First

Standalone Roper cooktops are not common, so most surface-burner work on Roper equipment involves the top of a Roper range. Electric Ropers almost always use plug-in coil elements set in drip pans, each controlled by an infinite switch that cycles power on and off. Older built-in cooktops with the Roper badge follow the same design. Because each burner is its own circuit, a failure is usually limited to one position.

Overheated receptacle losing contact tension behind the drip pan
Pitted coil element terminals causing intermittent heating
Infinite switch failure leaving a burner glowing at all settings
Heat-damaged wiring between switch and receptacle on older units

The full explanation, including what you can safely check yourself and when repair beats replacement, is in our Roper cooktop repair guide.

Island cooktops and remodeled counters

Kitchens in the newer subdivisions often put a gas or glass cooktop in the island, with the wall oven elsewhere. Gas burners that click without lighting usually have spill residue on the igniter or a misaligned burner cap. Radiant glass tops more often lose a single element, a switch or the hot-surface indicator. Induction units add a power board and cooling fan that can fail after a surge.

In older Concord homes, cooktops are sometimes squeezed into counters cut for a different model, and wiring or the gas connection can be tight underneath. Before calling, make sure burner caps are seated, wipe the igniters dry, and check the breaker. If you smell gas, turn the burner off, leave, and call the gas utility or 911.

The technician tests igniters, spark modules, elements, switches and controls from above and below the counter, then gives you the diagnosis and price. A cracked glass top can often be replaced on its own, and we will tell you if the part is still available.