Why do I need electricity for my Roper gas range to work?

The spark module that lights the burners and the glow-bar igniter in the oven both need household power. Without it, the oven will not light and the burners will not spark. During an outage, a burner can sometimes be lit carefully with a long match, but the oven will not run.

My slide-in range in Harrisburg shows an error after every storm. What can be done?

First, reset it at the breaker and see if the error clears. If it keeps returning, a sensor or control board may have been damaged by a surge, and we can test both. Surge protection suited to the range is worth discussing once it is repaired.

Do you repair dual-fuel ranges in Concord homes?

Yes. Dual-fuel ranges have gas burners on top and an electric oven below, so we test both systems. We give you the diagnosis and price for each part of the repair before starting.

Roper Repair

Roper Range Repair in Concord & Harrisburg, NC

Roper range repair in Concord & Harrisburg, Cabarrus County. We diagnose first and agree the price before any work.

Same-day appointments when available90-day parts / 30-day labor warrantyAll major brandsPrice confirmed before work

(980) 588-8688

Open 24 hours, 7 days a week

Schedule Your Repair

Service Type

What type of service do you need?

Or call us directly:

(980) 588-8688

90-Day

Parts Warranty

Same Day

Availability

How It Works

Book Online or Call

Tell us the appliance, the brand and what it is doing

Technician Visit

Same-day when the schedule allows

Diagnose & Quote

Price agreed first — no work without your approval

Fix & Test

Repair done, tested before we leave

Related Services

Samsung Range Repair

LG Range Repair

Whirlpool Range Repair

GE Range Repair

Maytag Range Repair

Bosch Range Repair

KitchenAid Range Repair

Frigidaire Range Repair

Charlotte, NC & Nearby SC

Ready to schedule your repair?

ProFix Appliance Repair Charlotte — appliance repair across the Charlotte region. Same-day appointments when the schedule allows.

Call (980) 588-8688 Book Online Now

Roper Ranges: What We Check First

The freestanding range is the Roper product most often found in rental kitchens across Mecklenburg and the surrounding counties. Electric models combine coil burners with a bake and broil oven, while gas models use spark-ignited burners and a glow-bar oven igniter. Both are built on basic Whirlpool designs with mechanical knobs and a small electronic or analog clock and oven control. Looking at the range as one appliance, rather than burner by burner, helps sort out faults that affect several parts at once.

Burned terminal block leaving the whole electric range dead
Loose gas range cord cutting power to spark and igniter
Worn oven door hinges and gasket leaking heat into the kitchen
Oven control fault on older Roper ranges with discontinued parts

The full explanation, including what you can safely check yourself and when repair beats replacement, is in our Roper range repair guide.

Slide-ins, touch controls and storm surges

Slide-in and front-control ranges with touch panels and convection fans are common in the newer kitchens here. Those controls are sensitive to the voltage spikes that come with summer thunderstorms, and a range that beeps, shows an error or will not respond after a storm may need only a power reset, or may have a damaged board or keypad. Older freestanding ranges near downtown Concord tend to have mechanical faults instead.

Try turning the range's breaker off for a minute and back on. Check that the anti-tip bracket is engaged and that the range has not been pulled forward, which can strain the gas line or power cord. If the oven or a burner still fails, note which parts work and which do not before you call.

The technician tests the oven and surface components, the sensor and the control, then explains the repair and price before beginning. A range that is otherwise sound is usually worth repairing, and we will tell you if a board for an older model is no longer made.