Why is my Fisher & Paykel DishDrawer leaking?

A hardened lid seal or a drawer that is not closing fully are the most common causes. Overloading or dishes blocking the lid can also cause leaks. Replacing the lid seal usually solves it.

Why does my Mount Pleasant dishwasher leave orange stains on the racks?

That is usually iron from well water. It can stain racks and the tub and sometimes contributes to valve wear. We repair the dishwasher side, and a water treatment company can address the iron at the well.

My Midland dishwasher stopped mid-cycle during a power outage. Is it damaged?

Probably not, but it may hold an error. Turn the breaker off for a minute, then on, and run a short cycle once the well pump has power. If it still will not run, we can test the controls and sensors.

Fisher & Paykel Repair

Fisher & Paykel Dishwasher Repair in Midland & Mount Pleasant, NC

Fisher & Paykel dishwasher repair in Midland & Mount Pleasant, Cabarrus County. We diagnose first and agree the price before any work.

Same-day appointments when available90-day parts / 30-day labor warrantyAll major brandsPrice confirmed before work

(980) 588-8688

Open 24 hours, 7 days a week

Schedule Your Repair

Service Type

What type of service do you need?

Or call us directly:

(980) 588-8688

90-Day

Parts Warranty

Same Day

Availability

How It Works

Book Online or Call

Tell us the appliance, the brand and what it is doing

Technician Visit

Same-day when the schedule allows

Diagnose & Quote

Price agreed first — no work without your approval

Fix & Test

Repair done, tested before we leave

Related Services

Samsung Dishwasher Repair

LG Dishwasher Repair

Whirlpool Dishwasher Repair

GE Dishwasher Repair

Maytag Dishwasher Repair

Bosch Dishwasher Repair

KitchenAid Dishwasher Repair

Frigidaire Dishwasher Repair

Charlotte, NC & Nearby SC

Ready to schedule your repair?

ProFix Appliance Repair Charlotte — appliance repair across the Charlotte region. Same-day appointments when the schedule allows.

Call (980) 588-8688 Book Online Now

Fisher & Paykel Dishwashers: What We Check First

The DishDrawer is the reason many people know Fisher & Paykel. Each drawer is a complete dishwasher: a pull-out tub, an integrated motor and pump at the bottom, a filter, and a lid that lowers to seal the tub during the wash. A flexible harness and hose follow the drawer as it opens and closes, carrying power, signals and water. In a double DishDrawer, the top and bottom are independent machines that share a cabinet but not a motor or control. Fisher & Paykel also sells conventional built-in dishwashers, which follow a more familiar design.

Hardened lid seal letting water or steam escape the drawer
Lid mechanism failure preventing the tub from sealing
Integrated motor and pump fault stopping the wash
Worn flexible harness causing intermittent drawer faults

The full explanation, including what you can safely check yourself and when repair beats replacement, is in our Fisher & Paykel dishwasher repair guide.

Well water inside the dishwasher

A dishwasher fills through a small inlet valve with a fine screen, and on well water that screen can clog with sediment until the machine underfills and cleans poorly. Iron leaves orange or brown stains on racks and the tub, and minerals form a film on glasses. Over time, grit wears the valve seat and the wash pump seal, which can lead to leaks around the base.

Clean the filter in the bottom of the tub and check the spray arms for blocked holes. If the house loses water when the well pump loses power, a dishwasher that was mid-cycle may show an error afterward; reset it at the breaker and run a short cycle. If water appears under the door, turn off the supply and power.

The technician tests the inlet valve, pump, heater, float and control, cleans what can be cleaned and quotes before replacing parts. We can tell you when a whole-house filter would extend the life of the repair, though that work belongs to a water treatment company.